Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Atlanta?
A chimney liner replacement or rebuild in Atlanta typically costs between $2,800 and $7,500 for most single-family homes. The liner portion alone usually runs $1,800 to $4,200 installed, while a partial chimney rebuild adds $1,000 to $3,300 depending on how much masonry has to come down. If both are needed at once, which is common in older Atlanta neighborhoods like Kirkwood and East Atlanta, you’re looking at the combined figure. These numbers reflect what we’ve seen across the Atlanta market in 2025 and into 2026, and they include labor, materials, and disposal.
Before we go deeper, let’s be clear about what these terms actually mean. A chimney liner is the flue inside your chimney that carries smoke and gases up and out. A rebuild means tearing down and replacing damaged brick or stone at the top of the chimney, or in severe cases, the entire stack from the roofline up. Most Atlanta homes built before 1980 have original clay tile liners that have cracked from decades of moisture and heat cycling – and in neighborhoods like Decatur, Virginia Highland, and Grant Park, we see this constantly.
Ruben Castellano and the team at Alcott Chimney Atlanta have been pricing and completing liner and rebuild work in the Atlanta metro since 2002. We write the price down before any work begins, so there’s no ambiguity when the job is done.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s a line-item breakdown based on actual Atlanta-area pricing as of 2026. These figures assume a standard two-story home with a masonry chimney and no major structural surprises.
| Service | Typical Atlanta Price Range | What It Includes |
|---|---|---|
| Chimney inspection (Level 2) | $250 – $550 | Camera scan of the flue, written condition report, repair recommendation |
| Stainless steel liner (DuraFlex) | $1,800 – $4,200 | Liner, insulation, top plate, rain cap, connection to appliance or fireplace |
| Partial chimney rebuild (above roofline) | $1,000 – $3,300 | Demolition of damaged brick, new brick or stone, mortar crown, flashing repair |
| Full chimney rebuild (roofline to top) | $4,500 – $9,000 | Complete teardown and reconstruction, new liner, new crown, new flashing |
| Combined liner + partial rebuild | $2,800 – $7,500 | The most common package we quote in Atlanta |
| Chimney crown repair (standalone) | $350 – $900 | Removal of cracked crown, new mortar or concrete crown, sealing |
| Flashing repair | $300 – $850 | Replacement or repair of the metal where chimney meets roof |
| HeatShield resurfacing (alternative to liner) | $2,200 – $5,000 | Ceramic-based resurfacing system for moderately damaged flues |
These are real numbers from the Atlanta market, not national averages. Why does Atlanta differ from, say, a market in Ohio or Texas? Labor rates are higher here, homes sit on varied foundation types, and the freeze-thaw cycle in Georgia’s winters – while milder than the Midwest – still cracks masonry. We also deal with a lot of moisture intrusion because Atlanta gets roughly 50 inches of rain a year, and humidity accelerates brick spalling.
One thing that’s worth saying plainly: the liner and rebuild are often done together. If the bricks at the top of your chimney are crumbling, water has likely been getting into the flue for years, which means the liner is compromised too. Fixing one without addressing the other leaves you with a chimney that looks better but still isn’t safe to use.
If you want a precise number for your specific chimney, call (762) 356-6423 and we’ll schedule an inspection. The estimate is free, and you’ll get a written price before anything begins.
What Affects Chimney Liner & Rebuild Pricing in Atlanta
Six factors move the price up or down more than anything else in the Atlanta market:
- Height and accessibility of the chimney. A one-story ranch in Smyrna is faster and safer to access than a three-story Victorian in Inman Park. Steeper roof pitches add labor time, which adds cost.
- Type of liner being installed. DuraFlex stainless steel is the go-to professional standard, but it comes in different grades and diameters. A 6-inch liner for a furnace is less expensive than an 8-inch liner for a large fireplace. HeatShield resurfacing costs more upfront but avoids demolition and works well for flues with moderate cracking.
- Extent of masonry damage. If the spalling goes deeper than face bricks, you’re into structural rebuild territory. We’ve seen chimneys in Midtown and Buckhead where the entire stack had to come down because mortar joints had turned to sand.
- Liner size and draft requirements. Gas furnaces, wood-burning fireplaces, and water heaters all have different flue sizing needs. A chimney serving multiple appliances may require a multi-flue liner system, which costs more.
- Permit and inspection requirements in your jurisdiction. The City of Atlanta requires permits for structural chimney work, and unincorporated DeKalb and Fulton counties have their own processes. Permit fees are typically $50 to $200, but they’re part of the final quoted price when we handle the paperwork.
- Age and construction style of the home. Pre-1950 Atlanta homes often have unlined or improperly lined chimneys that need more prep work. Homes built after 1980 usually have clay liners, but clay cracks under Atlanta’s humidity and heat cycling just like anything else.
How to Save on Chimney Liner & Rebuild
You don’t have to overspend to get this done right. Here’s what actually helps keep the cost down without cutting corners:
- Address the problem early. A cracked crown that costs $900 to fix today becomes a $6,000 liner-and-rebuild job next year if water keeps pouring in. We see this in North Decatur and Druid Hills constantly. The earlier you catch it, the less you pay.
- Combine the liner and rebuild. If both are needed, doing them at once saves you mobilization costs and avoids paying for scaffolding or roof access twice. One trip, one setup, one written price.
- Ask about HeatShield as an alternative. HeatShield resurfacing can restore a moderately damaged flue without full liner replacement. It’s a ceramic coating applied to the inside of the existing flue, and we use the HeatShield system regularly when the clay tiles are still structurally intact. It’s not right for every chimney, but when it is, it’s often $800 to $1,500 less than a full stainless liner install.
- Get the inspection done first. Don’t guess. A Level 2 camera inspection tells you exactly what’s broken and what isn’t. You’ll get a written report and a fixed price, so you’re not paying for work you don’t need.
- Use a company that writes the price down before work starts. Sounds obvious, but it’s the single biggest money-saver in this trade. When the price is written and fixed, you can’t be surprised at the end of the job. At Alcott Chimney Atlanta, that’s not an upsell – it’s how every job runs, no exceptions.
We offer free estimates on all liner and rebuild work. Call (762) 356-6423 and a real person answers, any time of day or night. If you’re in Atlanta, Decatur, Sandy Springs, Roswell, Marietta, or anywhere in the metro, we’ll come out, inspect, and hand you a written quote before any work begins.
Why Atlanta Homeowners Choose Alcott Chimney Atlanta for Liner & Rebuild Work
We solve two problems most chimney companies don’t address: the quality of the work and the certainty of who’s doing it. Ruben Castellano founded this business in 2002 with a simple idea: if you can’t trust the person at your door, nothing else matters. That’s why every technician who works for us goes through background checks and identity verification before they ever step onto your property. It’s part of the Threshold Standard, and it’s non-negotiable.
Here’s how it works. When you book a liner or rebuild job with us, you’ll receive the technician’s name and photo before the visit. The technician will arrive in uniform and present a photo ID badge at your door. You’ll know exactly who is coming, before they arrive. For homeowners who are often home alone, parents with young kids, and older Atlanta residents, this is the difference between opening the door with confidence and feeling uneasy the whole time.
We also carry and install professional trade materials – DuraFlex liner systems, HeatShield resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield. These are the brands chimney professionals specify, not box-store substitutes. A liner is only as good as the material it’s made from and the hands that install it. We don’t cut either corner.
Every repair we complete carries a written guarantee. If the repair fails within the coverage period, the second visit is free. That’s our 365-Day Done Right Promise – a full year of accountability on every job, not a vague promise that evaporates when you call back. And it’s included at no extra charge. Always has been, always will be.
If you’d like to see more about how we approach this work, you can read our Chimney Liner & Rebuild in Atlanta service page for the full breakdown of materials, timelines, and what to expect during the job. And if you’re just looking around, our home page has more on who we are and how we operate.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Atlanta?
A stainless steel chimney liner replacement in Atlanta typically runs $1,800 to $4,200 installed, with most jobs landing around $2,500 to $3,200. The final price depends on liner diameter, chimney height, and whether insulation is required. Call (762) 356-6423 for a free, written estimate on your specific setup.
Is it cheaper to repair or replace a chimney liner?
Repairing a liner, when possible, costs less than replacing it. A HeatShield resurfacing job in Atlanta runs $2,200 to $5,000, which can be less than a full stainless steel liner replacement in certain cases. But if the existing liner is severely cracked or has shifted, replacement is the only safe option. We’ll show you camera footage from the inspection so you can see exactly what you’re dealing with before deciding.
How much does a partial chimney rebuild cost in Atlanta?
A partial chimney rebuild above the roofline in Atlanta typically costs $1,000 to $3,300. That covers demolition of damaged brick, new brick or stone, a new mortar crown, and flashing repair. If the entire chimney needs rebuilding from the roofline up, expect $4,500 to $9,000. Call (762) 356-6423 and we’ll give you a written price.
Can you replace a chimney liner and rebuild the chimney the same day?
Yes, in most cases. A standard liner replacement combined with a partial rebuild can be completed in one day, though larger rebuilds may take two to three days. We’ll tell you the timeline upfront when we quote the job, and you’ll have a written price before work starts.
Do I need a permit for chimney liner or rebuild work in Atlanta?
Structural chimney rebuild work in the City of Atlanta requires a permit, and DeKalb and Fulton counties have similar requirements. We handle permit paperwork as part of the job. Liner-only replacements sometimes don’t require a permit, but we’ll check your specific jurisdiction and include any fees in your written estimate. No surprises at the end.
How much does chimney crown repair cost in Atlanta?
Standalone chimney crown repair in Atlanta costs $350 to $900. That includes removing the cracked crown, pouring a new one, and sealing it against water intrusion. If the crown damage has allowed water into the flue, you may also need liner work, which we’ll identify during inspection.
Can you come today for a chimney liner or rebuild quote?
Yes. We answer every call with a live person, 24/7, and we offer same-day and next-day inspections across the Atlanta metro. Call (762) 356-6423 and we’ll get you on the schedule, give you a written price, and tell you the technician’s name and show you their photo before they arrive.
Pricing reflects the Atlanta market as of 2026. Alcott Chimney Atlanta offers free estimates – call (762) 356-6423.
Written by Ruben Castellano, Owner at Alcott Chimney Atlanta, serving Atlanta since 2002.
What Our Customers Say
"Water was leaking around the flashing. They resealed it and installed a new crown coating. Dry through two heavy rains since."
- Douglas P."Fast and tidy. Fireplace draws properly again."
- Mina K."Having a vetted person in the house was why we picked them. Background checked, badge, polite. The fireplace has never been cleaner."
- Nadine F.