Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Inspection in Atlanta: What to Know First
We perform independent Olympia Chimney chimney inspections across Atlanta, and most inspections are completed in a single visit with a written report in hand before we leave the driveway. A standard Level 1 visual inspection runs $149 – $229, while a camera inspection with a full video walkthrough typically lands between $249 – $399 depending on flue height and access. If you own an Olympia Chimney system and want to know exactly what’s happening inside that flue, call (762) 356-6423 and talk to a live person who can schedule you right then.
This page is for Atlanta homeowners who bought or inherited an Olympia Chimney product and need a straight answer about whether it’s safe to burn. We’ll walk through what fails on these systems, what an inspection actually finds, and what it costs to put right.
How Olympia Chimney Products Fail – and How We Find It
Olympia Chimney builds solid stainless and galvanized chimney systems, but they fail in predictable ways we see weekly across Atlanta. Here’s what we encounter most:
- Olympia Galva-Temp / Sentinel series corrosion at the chase top. Atlanta’s humidity and summer thunderstorms sit on unsealed chase covers and work their way down. We regularly find rust blooms at the flue pipe seam where the storm collar wasn’t resealed. The fix is usually a new collar and silicone, not a liner replacement, but only a camera inspection confirms the surface rust hasn’t turned into pinholes lower down.
- Twist-lock joint separation on Olympia double-wall connector pipe. These sections are designed to seat with a quarter-turn, but if the original install didn’t use the locking tabs or a homeowner pulled the pipe for cleaning and seated it wrong, the joint gaps open. That spills flue gas inside a chase or wall cavity. We find this on roughly one in eight Atlanta installs we inspect.
- Warped anchor plate above the firebox on Olympia zero-clearance units. Heavy burn cycles, especially with oak or hickory burned hot, distort the plate the chimney pipe seats into. You’ll see a visible gap at the firebox-to-pipe connection. It needs shimming or replacement, and it’s a fire hazard if left. This is one of the most common things we show homeowners on camera during a Level 2 inspection.
- Creosote glaze inside Olympia solid-pack insulated liners. Atlanta basements and exterior chases run cool overnight even in mild winters. The liner stays cool longer, and smoke condenses faster. What starts as fluffy creosote tars over into a hard glaze that a standard brush won’t touch. We identify the glaze stage on camera and recommend chemical treatment or mechanical removal rather than pretending a sweep fixes it.
- Galvanized outer wall delamination on older Olympia air-cooled chimney sections. Pre-2000 Olympia pipe used a thinner galvanized outer jacket. After twenty-plus Georgia summers of heat cycling, the outer layer flakes and the air-cooling channel loses flow. The inner liner can still look fine on camera, but the pipe isn’t cooling correctly anymore. We flag this because it manufacturers’ own documentation doesn’t discuss it much after warranty ends.
None of these failures announce themselves with smoke in the house. They show up on camera. That’s why a visual once-over at the firebox isn’t enough for an older Olympia system.
Styles & brands we work with





Our Olympia Chimney Chimney Inspection Process
Here’s what happens when you call us for an Olympia Chimney inspection in Atlanta:
- 1
We book a two-hour window and send the technician’s name and photo before arrival. You’ll know who’s walking up your driveway. They’ll show a photo ID badge at the door. No exceptions.
- 2
We start with the firebox and visible pipe. We check anchor plate seating, damper operation, and any visible joint gaps at the firebox-to-chimney connection. Most Olympia-specific failures start where you can see them.
- 3
We run a camera up the flue. Chin height depending, this takes 20 – 40 minutes. You’ll see the live feed or the recorded stills on the spot. We point out exactly what’s normal wear and what needs action, in plain English.
- 4
We inspect the chase top, cap, and storm collar from the roof. Atlanta pine needles, oak leaves, and the occasional squirrel nest all collect up top. But the real Olympia issue we look for is collar failure and water entry at the flue pipe seam.
- 5
We deliver a written report with photos and a flat price for any repair. You get the price before we touch a tool. If you approve, we typically fix minor Olympia repairs the same day. Bigger ones get scheduled, and the written quote is good for 30 days.
- 6
Every repair carries our 365-Day Done Right Promise. If it fails within a year, the second visit is free. That’s a written guarantee, not a handshake.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Chimney Inspection Costs in Atlanta
| Service | Typical Atlanta Price |
|---|---|
| Level 1 inspection (no camera, clean access) | $149 – $229 |
| Level 2 camera inspection (standard for real estate or after chimney fire) | $249 – $399 |
| Storm collar replacement (most common Olympia fix we find) | $180 – $340 |
| Twist-lock joint reseat and locking-tab install | $120 – $280 |
| Anchor plate shim or replacement | $350 – $700 |
| Creosote glaze removal (chemical treatment + mechanical) | $200 – $450 |
What moves the price: roofline height, chase access, how much creosote is present, and whether the existing Olympia pipe was installed to spec in the first place. Atlanta ranches and mid-century ranches with shallow roofs run lower. Two-story Victorians in Grant Park or Inman Park with steep pitches run higher. Call (762) 356-6423 for a free estimate, and we’ll tell you the exact price before any work starts.
Why Atlanta Homeowners Call Alcott Chimney Atlanta for Olympia Chimney Work
Ruben Castellano started Alcott Chimney in 2002, and the reason Atlanta homeowners keep calling us is simpler than most companies admit: we show you what’s wrong before we ask you for money. A camera inspection isn’t a gimmick. It’s the difference between “trust me, you need a new liner” and watching the rust pinholes on a screen with your own eyes. We name the part, show the image, and hand you a written price before we pick up a tool.
Every technician who steps onto your property is background-checked and identity-verified under the Threshold Standard, then announced by name and photo before arrival. If an Olympia pipe section is past saving, we may replace it with a DuraFlex liner or resurface the smoke chamber with HeatShield. We don’t push box-store substitutes, and we don’t recommend work that can safely wait. Written guarantee on every repair, a year of accountability, and a live person on the phone at 11 p.m. when something smells off. That’s the whole offer.
FAQs
No, but we recommend a Level 2 camera inspection for any Olympia Chimney older than 10 years or after a chimney fire, because Olympia-specific failures like twist-lock joint separation and anchor plate warping are only visible on camera. Call (762) 356-6423 and we’ll tell you which level fits your situation without overselling.
Some Olympia sections are readily available through supplier networks we use, but lead times for less common flue pipes can run a few weeks, so we’ll quote quality aftermarket options when they match or exceed the OEM spec. As an independent Olympia Chimney service provider, we’re not tied to manufacturer pricing or warranty restrictions when the aftermarket part is the better call.
Repair first, every time. A storm collar, locking tab, or anchor plate shim usually costs under $400 and restores the system to safe operation, while a full chimney pipe replacement can run $2,500 – $6,000 depending on chase height and access. We’ll show you the camera evidence and give you both prices in writing, then you decide.
Most inspections are scheduled within a few days, and we protect our calendar during October and November because that’s when Atlanta homeowners realize burning season is here. If you’re smelling smoke or seeing moisture around the firebox, call (762) 356-6423 and tell us what you’re seeing, and we’ll tell you what it actually means.
Written by Ruben Castellano, Owner, Alcott Chimney Atlanta at Alcott Chimney Atlanta, serving Atlanta and nearby areas.