Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Sweep in Atlanta: What to Know First
An Olympia Chimney chimney sweep in Atlanta typically costs $189 to $319 for a standard open fireplace, and we can usually get you on the schedule within a week, not a month. We are an independent Olympia Chimney service provider, which means we work on these systems every week but we are not owned by or authorized by the manufacturer. If your Olympia fireplace or stove is drafting poorly, producing smoke back into the room, or you simply cannot remember the last time it was cleaned, call (762) 356-6423 and we’ll walk you through what you’re seeing.
This page is written for homeowners in Atlanta who own an Olympia Chimney fireplace, insert, or stove and want a sweep done right, by someone who understands how these specific systems wear in this specific climate. No upselling scare tactics. No vague pricing. Just straight answers about what a sweep involves, what it costs, and what we actually find inside Olympia flues here in Atlanta.
How Olympia Chimney Products Fail – and How We Fix Them
Olympia Chimney builds solid, middle-market chimney systems. They are common across Atlanta, from Midtown condos to newer construction in Smyrna and Brookhaven. But every brand has patterns. Here is what we see repeatedly on Olympia Chimney jobs in this city:
- Olympia Zero-Clearance Fireplace (Olympia ZC Series) – refractory panel cracking at the back wall. These factory-built fireplaces use pre-cast refractory panels that look like brick. After seven to ten years of Atlanta’s heat-and-humidity cycling, the back panel often develops a hairline crack near the smoke shelf. It is rarely a fire hazard by itself, but the crack lets heat reach the metal firebox shell behind it, which accelerates rust. During a sweep, we document that crack by camera, tell you plainly whether it can wait or needs a panel swap, and give you the price for both options before we do anything.
- Olympia Wood-Burning Stove (Rustic and Sierra lines) – creosote glaze in the connector pipe, not the flue itself. Most homeowners think creosote builds up in the chimney. On Olympia stoves, we often find the worst buildup in the single-wall connector pipe between the stove and the wall thimble. That makes sense once you understand airflow: the connector pipe runs hotter when the stove is burning, which turns smoke particles into a hard, shiny glaze that is significantly harder to remove than the flaky stuff. We pull that connector pipe on nearly every Olympia stove sweep in Atlanta and clean it by hand, not just with a brush. This is the kind of detail that gets missed when someone runs a brush up the flue and calls it done.
- Olympia Factory-Built Chimney (Venting and air-cooled systems) – rust at the chase top where the pipe exits. Atlanta rain is relentless, and Olympia chase tops, the metal cap covering the chimney pipe where it exits the roof, are a common failure point. If the chase top rusts through, water runs down the outside of the pipe and into the chase enclosure, where it rots framing and soaks insulation before you ever see a stain on the ceiling. During a sweep, we check for that rust and tell you if the chase top needs replacement. It is a straightforward fix that costs a lot less than the drywall and framing repair you’ll face if it goes unnoticed for another year or two.
- Olympia Gas Log Sets – soot accumulation from Atlanta’s irregular gas pressure. We service plenty of Olympia gas log sets in Atlanta, especially in older neighborhoods like Grant Park and East Atlanta where gas supply pressure can fluctuate from the original plumbing. Those fluctuations cause incomplete combustion, and incomplete combustion produces soot, which then coats the logs, the pilot assembly, and the smoke shelf. A gas fireplace sweep is less about the flue and more about cleaning the log set itself, checking the gas valve for proper operation, and making sure the damper is set correctly. Olympia logs are ceramic fiber, and we use only non-abrasive methods so we do not damage the log surfaces.
- Olympia Fireplace Inserts – the blower motor, not the chimney, is often the real problem. People call us for a sweep because their Olympia insert is not heating the room well. Sometimes the flue is dirty, sure. But a surprising number of Olympia insert service calls in Atlanta end up being a clogged blower motor or a broken thermodisc, the small temperature switch that tells the blower when to kick on. Those parts sit behind the lower access panel and collect dust, pet hair, and Atlanta pollen. We check the blower during every Olympia insert sweep, and we show you the filter if there is one. If you need a blower motor, we give you the OEM part number and the price before ordering it.
Styles & brands we work with





Our Olympia Chimney Chimney Sweep Process
Here is exactly what happens when you call us for an Olympia Chimney chimney sweep in Atlanta, from the first call to the moment we leave the driveway:
- 1
You call, a person answers. Not a phone tree. We ask what you are seeing with your Olympia system. “Tell me what you’re seeing, and I’ll tell you what it actually means.” Then we schedule a time, confirm the date, and send you the technician’s name and photo before arrival.
- 2
We verify at the door. The technician arrives in uniform and shows a photo ID badge. You know exactly who is walking in. Every one of our techs passes the Threshold Standard background check and identity verification before they ever set foot on a customer’s property.
- 3
We inspect before we sweep. Using a camera, we look at the flue from top to bottom. We’re checking for creosote buildup, blockages, cracked flue tiles, water damage, and animal nests. If we find something, we show you the camera footage on the spot, in plain English, before we quote a single dollar figure.
- 4
We clean the full system, not just the flue. We run the right brush for your liner type, remove creosote and soot from the firebox and smoke chamber, clean the damper, and vacuum everything. For Olympia stoves, we also pull the connector pipe and clean it separately. For gas log sets, we clean the logs, the pilot assembly, and the gas valve area.
- 5
We give you a written report and a written price for any repairs. If you need new refractory panels, a replacement chase top, or a blower motor, you get a written quote. Nothing is recommended without camera evidence you have seen with your own eyes. If nothing is wrong, we tell you that too, and you only pay for the sweep.
- 6
We back the work. Every repair comes with a written guarantee. If the repair fails within the coverage period, the second visit is free. And our 365-Day Done Right Promise covers every completed job for a full year. If it is not right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Chimney Sweep Costs in Atlanta
We do not give vague “call for pricing” answers. Here is what you should expect to pay for an Olympia Chimney chimney sweep in metro Atlanta:
| Service | Typical Price Range |
|---|---|
| Standard open fireplace sweep (Olympia ZC or masonry with Olympia components) | $189 – $249 |
| Wood stove sweep, including connector pipe removal and hand cleaning | $219 – $319 |
| Gas log set cleaning (Olympia ceramic fiber logs, non-abrasive) | $149 – $229 |
| Insert sweep with blower inspection | $219 – $299 |
| Level 2 camera inspection (if you’re buying a home or suspect damage) | $199 – $329 |
What moves the price: the type and amount of creosote (glazed buildup takes longer to remove), whether the connector pipe needs to be pulled, whether your chase top requires a ladder and rooftop access, and whether the firebox has years of neglected soot. You will always get a written price before we start, and that price is the price. No surprise line items at the end. Call (762) 356-6423 for a free estimate.
Why Atlanta Homeowners Call Alcott Chimney Atlanta for Olympia Chimney Work
We have been serving Atlanta homeowners since 2002 as part of the Threshold Group family of home-service companies. That matters for one specific reason: every technician who shows up at your door has passed a background check and identity verification before we ever give them your address. You get their name and photo before the visit. They show a photo ID badge at the door. Every time. If you are home alone, if you have young kids, if you are older and want to know exactly who is coming before you open the door, that matters.
We also do not play the bait-and-switch pricing game. You get a written price before any work begins, a written guarantee on every repair, and a free second visit if a repair fails. When an Olympia Chimney part is no longer available or a liner needs replacement, we install the same professional trade brands we would put in our own homes: DuraFlex liner systems, HeatShield resurfacing material, and Gelco sealants. We are an independent Olympia Chimney service provider, and we know these systems well enough to tell you when a repair can wait and when it cannot.
FAQs
Every year if you burn wood regularly, or after roughly one cord of wood burned, whichever comes first. Atlanta’s humidity can cause creosote to harden faster than in drier climates, which makes annual sweeps more important here than in, say, Arizona. A fast annual sweep costs less than waiting three years and needing a heavy glaze removal.
No. A professional chimney sweep, done by a service provider who does not modify the system, does not void your Olympia Chimney warranty. In fact, neglecting to have your chimney swept can contribute to the kind of damage warranties do not cover because it is considered lack of maintenance. Keep records of your sweeps. If you ever need to file a warranty claim, those records help.
When Olympia OEM parts are available and make sense, yes. Some Olympia components, like refractory panels and specific door gaskets, are still manufactured and we order them directly. But there are cases where an aftermarket part is actually the safer choice. For example, if an Olympia flue liner has corroded, installing a DuraFlex stainless steel liner is a permanent fix that outlasts the original. We always tell you the part choice and the reasoning behind it before we quote you a price.
Usually, yes. During the fall rush and the week before Thanksgiving, we do get backed up, but even then you will not wait more than ten to fourteen days. We do not overbook, because nothing ruins honest work like rushing. Call (762) 356-6423 and we will tell you our soonest available slot and give you a written estimate on the spot.
Creosote builds up layer by layer. First-stage creosote is flaky and easy to remove. Second-stage is crunchy, like burnt popcorn, and slightly harder. Third-stage is a hard, shiny glaze that requires chemical treatment or special rotary tools to remove, and it costs more. In Atlanta’s humid air, creosote tends to move from stage one to stage three faster than in dry climates. The longer you wait, the more expensive the sweep becomes, and the higher the risk of a chimney fire. Call (762) 356-6423 and get it done. The estimate is free, and you will know exactly what it costs before you commit.
Written by Ruben Castellano, Owner, Alcott Chimney Atlanta at Alcott Chimney Atlanta, serving Atlanta and nearby areas.